Owner Manual
Twist each caster to loosen & place
into each post.
NOTE: All caster brakes must be in
opposite corners.
Use a wrench to tighten each caster
in a clockwise motion. Tighten until
fully secure.
With all shelving units in place, use
the allen key to tighten up all the set
screws on the gussets.
Repeat for all shelving units.
Step 5:
Step 6:
Caster Installation
*(skip to step 8 if not applicable)*
Step 7:
Allen Key
Set Screw
Gusset
Loosen
Caster
Place
into Post
Wrench
Tighten in a
Clockwise Motion