Owner Manual
Insert post legs, opposite side of
bullet feet, into each gusset hole.
post legs should easily slide straight
through & hit the oor. (See image to
the right)
Place 2 wood blocks on each side of the
shelving unit. Slide your next shelf into
place. Make sure it is at against the
wood. Spacing should be 18¼” between
shelves.
Repeat for the remaining shelving units.
Using an allen key, loosen up all the
set screws on the gussets.
Repeat for all shelving units.
Step 2 Continued:
Step 3:
Step 4:
Allen Key
Set Screw
Gusset
18¼”
between
shelves
[
Wood Block
Shelf must be at
against the wood
Posts must hit oor