SSS Spec Sheet

General Information
IMC Teddy 50 Ranick Drive East Amityville, NY 11701 [phone] [e-mail] www.imcteddy.com
SSS
Security, Louvered or Solid Shelving
Project Name:
Consultant:
Item #:
Model #:
Quantity:
SSS-60 0320
Specications Product Guide Options
SSS High Security Shelving is pro-
duced from 14GA 18-8 type 300
series stainless steel, shelf edges
turned down 90 degrees and in
at 45 degree angle, with corners
notched and continuously welded
to upright posts.
Uprights are 1⅝” OD, 16GA 18-8
type 300 series stainless steel
posts, with welded-in top caps,
and non-removable, sanitary, ad-
justable stainless steel feet. All
shelving units and components
are NSF approved and all exposed
surfaces nished brush satin.
SSS shelves are recommended for
high security facilities and federal
correctional facilities or where all
welded shelving is required.
Solid surface design provides easy
access and quick clean up of spills.
Large louvers allow uniform heat
distribution.
Stationary units provided with
stainless steel posi-grip adjustable
foot welded inserts.
Mobile units provided with welded
5” casters. See selection guide and
information.
□ RC-5 - 5’’ Rubber Casters - Standard
□ PCY-5 - 5’’ Poly Casters - Heavy
Duty
□ PCYS-5 - 5’’ S/S Poly Casters -
Heavy Duty
□ PPC-5 - 5’’ Plate Poly Casters -
Heavy Duty
□ GF-2 - Grease Fittings
□ FF-50 - S/S Flanged Feet
□ BAC - Brakes on All Casters
□ RB-10 - Revolving Bumpers
□ GA-12 - 12GA Upgrade
□ SRE-60 - Shelf Reinforcement (Solid
Only)
□ PLG-70 - Perimeter Ledge
□ SEI-80 - Seismic Earthquake
Shelving
Shown w/
Optional Casters