MiniMc TP-TX/FX MiniMc TP-TX/SFP Operation Manual
FCC Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B computing device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Table of Contents FCC Radio Frequency Interference Statement .....................................................i Warranty.............................................................................................................i About the MiniMc..............................................................................................1 LED Operation...................................................................................................1 Specifications ....................................
About the MiniMc The MiniMc is a 10/100 Auto Negotiating miniature media converter. It is available in a fixed optical 1x9transceiver version, dual or single strand, as well as an SFP version. The optical transceiver port always operates at 100 Mbps full duplex. The copper port auto-senses the connected device’s speed (10Mbps or 100Mbps) and duplex mode (HDX or FDX including Flow Control).
Specifications Operating Temperature -32° to 122° F (0° to 50° C) Storage Temperature -13° to 158° F (-25° to +70° C) Humidity: 5% to 95% (non-condensing), 0 – 10,000 ft. altitude Input Power Consumption (Typical, varies with optical transceiver type) 500mA@5V DC NOTE Use only the supplied IMC Networks wall adapter or USB cable with this product. Using a non-IMC Networks power source will void the warranty.
Fiber Optic Cleaning Guidelines Fiber Optic transmitters and receivers are extremely susceptible to contamination by particles of dirt or dust, which can obstruct the optic path and cause performance degradation. Good system performance requires clean optics and connector ferrules. 1. Use fiber patch cords (or connectors, if you terminate your own fiber) only from a reputable supplier; low-quality components can cause many hard-to-diagnose problems in an installation. 2.
Safety Certifications UL/CUL: Listed to Safety of Information Technology Equipment, including Electrical Business Equipment. CE: The products described herein comply with the Council Directive on Electromagnetic Compatibility (2004/108/EC) and the Council Directive on Electrical Equipment Designed for use within Certain Voltage Limits (2006/95/EC). Certified to Safety of Information Technology Equipment, Including Electrical Business Equipment. For further details, contact IMC Networks.
19772 Pauling • Foothill Ranch, CA 92610-2611 USA TEL: (949) 465-3000 • FAX: (949) 465-3020 www.imcnetworks.com © 2009 IMC Networks. All rights reserved. The information in this document is subject to change without notice. IMC Networks assumes no responsibility for any errors that may appear in this document. MiniMc is a trademark of IMC Networks. Other brands or product names may be trademarks and are the property of their respective companies.
