Instruction manual

4
Unmanaged Modules
Before installing the module in an unmanaged chassis, manually configure all of the
desired DIP Switch selectable features. Modules must be configured as a HOST-
REMOTE pair via DIP Switches. Modules are shipped in the default setting as a
HOST.
HOST: S3-2 OFF
REMOTE: S3-2 ON
DIP Switches
The iMcV-T1/E1/J1-LineTerm DIP Switches are located on S2 and S3 on the PCB.
The location of the S2 and S3 DIP Switches are displayed in the following diagram: