Instruction manual

3
Managed Modules
The iMcV-T1/E1/J1-LineTerm modules are installed as a HOST-REMOTE pair and can
be remotely managed when the HOST is installed in an iMediaChassis with an SNMP
Management module.
For a managed environment, first manually configure the desired features through
DIP Switch settings to ensure this configuration is maintained if management is ever
lost. After the module is installed, the SNMP enabled features for troubleshooting
can be modified by using the included iView
2
SNMP management software. In a
managed chassis, the software settings take priority over DIP Switch settings. Ensure
the software settings match the desired configuration requirements for the installation
as the chassis may maintain an old setting from a previous installation for that slot
location.
iView² Management Software
iView² is the IMC Networks management software designed specifically for the IMC
Networks “iMcV” family of modules. It features a
GUI
and gives network managers
the ability to monitor and control the manageable IMC Networks products.
iView² is available in several versions, including WebServer version 3.0, and can also
function as a snap-in module for HP OpenView Network Node Manager and other
third party SNMP Management software. For assistance in selecting the right version
of iView² for your operating system, please visit:
http://www.imcnetworks.com/products/iview2.cfm
iView
2
supports the following platforms:
Windows 2000
Windows XP
Windows Vista
Windows 7
In addition, there are Java versions of iView² for any Java-capable operating systems
such as Linux.
Please see the
SNMP
Management Module installation guide for software
configuration options.