Instruction manual

11
Central
Office
Customer
iMcV-T1/E1/J1-LineTerm
iMcV-T1/E1/J1-LineTerm
Copper Copper
Fiber
X
None
Copper Loopback
Copper Loopback on Host iMcV-T1/E1/J1-LineTerm
Host
Remote
Central
Office
Customer
iMcV-T1/E1/J1-LineTerm
iMcV-T1/E1/J1-LineTerm
Copper Copper
Fiber
X
None
Fiber Loopback
Fiber Loopback on Remote iMcV-T1/E1/J1-LineTerm
Host
Remote
Pseudorandom Bit Sequence (PRBS) Testing
To test using PRBS, configure the iMcV-T1/E1/J1-LineTerm modules for No Loopback,
and then configure the Transmit Copper Data Source to PRBS. Configure the local
device for Loopback and start the test. Verify the PRBS LED is ON indicating no
errors are being received.
Central
Office
Customer
iMcV-T1/E1/J1-LineTerm
iMcV-T1/E1/J1-LineTerm
Copper
Pseudo Random
Bit Sequence
Copper
Fiber
PRBS LED
PRBS LED
PRBS
X
Host
Remote