Instruction manual

4
Dip Switch Feature Function Default
S1 LFD Link fault detection available in forced
mode only (S3 is ON)
OFF
S2 AN Auto Negotiation mode (plug-n-play)
available when forced mode is disabled
(S3 is OFF)
ON
S3 Force Force mode forces the module to operate
at 10 or 100 Mbps as determined by S4
OFF
S4 10/100 When ON, operates at 10 Mbps.
When OFF, operates at 100 Mbps.
Available when forced mode is enabled
(S3 is ON)
OFF
Remaining DIP Switches are factory configured—DO NOT CHANGE