Instruction manual

Configuring the iMcV-Giga-MediaLinX
The iMcV-Giga-MediaLinX may be configured with various features such as
LinkLoss, FiberAlert, Auto-Negotiation, duplex mode and speed. The following
sections include instructions for configuring both managed (via an SNMP-
compatible management application like iView²) and unmanaged modules.
In this section
• Managed Modules
• Unmanaged Modules
• Auto-Negotiation
• Selective Advertising
• Forcing the Duplex Mode
• Forcing the Speed
• FX Negotiation
• Master/Slave Mode
• Flow Control
Managed
Modules
To manage an iMcV-Giga-MediaLinX, it must be installed
within an SNMP-Manageable chassis. In a managed
environment, install the module first, and then configure it
using the management software. Within iView², configure
features and troubleshooting functions in the Module Detail
section under the picture of the module. See the iView²
online help file for more information.
NOTE
Until a module installed in a managed chassis is configured via the software, the
module (and its LEDs) may not work properly.
3