Instruction manual
2
Use the Graphical User Interface (GUI) to enable features by using the iView
2
SNMP management software. In a managed chassis, the software settings take
priority over the SNMP enabled feature DIP Switch settings. Make sure that the
software settings match the desired configuration requirements for the installation.
iView² Management Software
iView² is the IMC Networks management software designed specifically for the
IMC Networks “iMcV” family of modules. It features a GUI and gives network
managers the ability to monitor and control the manageable IMC Networks
products.
iView² is available in several versions and can also function as a snap-in module
for HP OpenView Network Node Manager and other third party SNMP
Management software. For assistance in selecting the right version of iView² for
your operating system, please visit:
http://www.imcnetworks.com/products/iview2.cfm
iView
2
supports the following platforms:
•
Windows NT
•
Windows 2000
•
Windows XP
In addition, there are Java versions of iView² for any Java-capable operating
systems such as Linux.
Please see the
SNMP
Management Module for software configuration options.
NOTE
IMC Networks’ iView
2
software is available for downloading from the web site:
www.imcnetworks.com
.
Unmanaged Modules
Before installing the module in an unmanaged chassis, including IE-MediaChassis
series and MediaChassis series, manually configure all of the desired DIP Switch
selectable features. In an unmanaged configuration, none of the DIP Switch
settings can be overridden by software.