Instruction manual

1
About the IE-MiniMc LFPT and Telco/LFPT
The IE-MiniMc LFPT and Telco/LFPT Industrial Ethernet miniature media converter
features 10/100 switching copper-to-fiber conversion, miniature size, plug-and-play
operation, and as a PD device, is compliant to the IEEE 802.3af Power Over Ethernet
(PoE) standard. The IE-MiniMc LFPT and Telco/LFPT supports an extended voltage
range as well as extended operating temperature.
The feature Link Fault Pass Through (LFPT) is permanently enabled on the media
converter to assist the customer in troubleshooting.
Installing IE-MiniMc LFPT and Telco/LFPT
The IE-MiniMc LFPT and Telco/LFPT installs virtually anywhere: as a standalone,
table-top device or on a DIN rail. As a standalone device, install IE-MiniMc LFPT and
Telco/LFPT in locations with extremely limited space. Also included are Velcro strips
to attach the device to most surfaces. A PowerTray/18 is available
for high density
applications.
DIN Rail Mounting
The IE-MiniMc LFPT and Telco/LFPT can be mounted with two DIN Rail clips, a
hardware option available through IMC Networks. The DIN Rail clips include screws
to allow the installation onto a DIN Rail. Install the screws into DIN Rail clips, which
should be mounted perpendicular to the DIN Rail. Snap the converter onto the clips.
To remove the converter from the DIN Rail, use a flat-head screwdriver into the slot
to gently pry the converter from the rail.
NOTE
The DIN clips are designed for use on a DIN-35 rail.
Powering the IE-MiniMc LFPT and Telco/LFPT
The IE-MiniMc LFPT and Telco/LFPT includes multiple powering options:
• A country-specific, high-reliability AC power adapter (included)
• The IEEE 802.3af Power over Ethernet standard; draws power from power
sourcing equipment
• The 4-terminal DC power block
• IE-PowerTray/18 for Rack Mounting