Instruction manual

29
The Configuration/Remote Screen
Depending on whether the IE-MiniFiberLinX-II is being set up as a standalone or in a
Host/Remote connection, the Configuration or Remote buttons will show a screen for
configuring the IE-MiniFiberLinX-II settings.
In addition to allowing setting changes on the IE-MiniFiberLinX-II, settings on the
ports can also be changed from the Configuration/Remote screen.
For information or instructions on the use of UMA (Unified Management Agent), refer
to the SNMP Management module manual.
Configuration File Save/Restore Function
Requirements
FiberLinX-II family series:
Minimum firmware version required:
IE-MiniFiberLinX-II: B1 or higher,
Required iView² version: 1.8.4 or higher
The Configuration File Save/Restore Function allows a user the ability to backup all
the configuration settings of a unit. With this backup, a user can restore settings to a
unit if necessary or use this backup to apply the same settings to a different unit.
All configurable managed objects are saved in a configuration file that is stored in the
unit’s Large File Area. This includes all configurable settings such as VLAN