Instruction manual
23
Mode Four - Transparency with Extra Tagging (or Q-in-Q)
This mode is designed to either pass all customer traffic with the defined extra tag (Q-
in-Q) or add and remove the defined extra tag (Q-in-Q) on all customer traffic.
Management traffic can be tagged or untagged.
Select
Y
on the initial config screen and then, select
Y
when asked to select Extra
Tags. When setting this operation mode, the question “Are Extra Tags left on the
Data Port” should be answered
NO
for the remote IE-MiniFiberLinX-II and
YES
for
the host connection.
Mode Five - VLAN Filter
This mode is designed to only pass traffic with any of the 32 tags that have been
identified in the user-defined table. No untagged traffic can pass and management
traffic must be tagged. No tags are added or removed from the traffic. Select
N
on
the initial config screen and then setup the VLAN screen.
VLAN IDs can be any number between 1 and 4,094.