Instruction manual

9
Configuration
The IE-MiniFiberLinX-II includes many features that function automatically or are
configurable via iView², iConfig, or a serial/Telnet session.
Software Configuration
The following table presents port options configurable from iView² or from a
serial/Telnet session. Refer to the iView² section later in this chapter or the iView²
Help file for more information. For information on configuring VLANs, refer to the
Serial Configuration/Telnet Session section in this chapter.
Feature iView² Serial/Telnet
FX/TX LinkLoss
9 9
FiberAlert
9 9
Loopback
9 9
Auto Negotiation
9 9
Selective Advertising
9 9
Force Mode
9 9
FlowControl
9 9
Bandwidth Control
9 9
VLANs
9
The following table presents management options configurable via iConfig or a
serial/Telnet session.
Feature iView² Serial/Telnet
PROM Software Download/Upload
9
Telnet Session
9
TFTP Trigger
9
Software Download Setup (TFTP)
9
DHCP
9
Configuration File/Save Restore
9
The following options are configurable through both iConfig and Serial:
• IP Address
• Subnet Mask
• Default Gateway
• MIB Community
• Traps Assignment
• Users
• Passwords
• Access Level
• Reboot