Instruction manual

2
Installing the IE-MediaChassis/2 (AC)
Use the IE-MediaChassis/2 (AC) as a table-top chassis, mount in a Rackmount shelf,
or mount it to a wall surface (brackets are not required).
1.
Install the IE-MediaChassis/2 (AC) by placing it on a flat surface.
2. If mounting on a Rackmount shelf, align screw holes and secure with
screws.
3.
If mounting the chassis on a wall, place two #10 panhead screws (not
supplied) on the wall the distance of the holes on the chassis, and then
hang the unit on the screws.
4.
Attach the cables between the chassis and the device that will be
interconnected, and then plug the unit into a reliable, filtered power
source.
5.
Install only in Restricted Access Areas (dedicated Equipment Rooms,
Equipment closets or the like) in accordance with Articles 110-18, 110-26,
and 110-27 of the National Electric Code, ANSI/NFPA 70.