Instruction manual

10
DIP Switch configuration
DIP
Switch
Name Description Default
Setting
1 Dual Enable dual channel OFF
2 1+1 Provides 1+1 protection with non-revertive switching OFF
3 1+1 Revert Provides 1+1 protection with revertive switching OFF
4 LoSpd A Force SFP "A" for low-speed operation OFF
5 LoSpd B Force SFP "B" for low-speed operation OFF
6 Reserved
LED Operation
Each IE-MultiWay includes SFP and RJ-45 LEDs.
SFP LED functions are as follows:
FLT
Glows amber when a fault is detected.
LNK Glows green with a valid optical link.
ACTIVE Glows green when the port is active
OFF when SFP is in standby (does not indicate activity)
OAM Glows green when an active OAM channel is established.
RJ-45 LED functions are as follows:
LNK/ACT
Glows green when a link is established on the TX port; blinks green
when activity is detected on the TX port.
FDX Glows amber when an FDX link is established on the TX port.
Not lit for HDX.
Console Port