Instruction manual

8
Commands List (Space Bar)
The IE-MultiWay also includes several device-specific options. To access these
options, press the
Space Bar from the Main Configuration screen, type the name of
the action to be performed (as shown below) and press
Enter .
Command Description
cleandb Reboots the unit with a clean database. This removes all information from
the database and sets the unit to factory defaults.
version Displays the unit’s firmware and hardware version
ifstats Displays interface statistics.
rmstats Displays remote monitoring (RMON) statistics on packets received as defined
in RFC 2819 for RMON.
sysdescr Allows the editing of sysName, sysDescr, and Port information
reboot Allows a soft reboot of the unit after changes are made by the end user
oam Enable/disable OAM.
sfpstats Provides information about the wavelength, serial number, output power,
BER and other information. Requires an SFP with DDMI.
port Displays the port status and allows changes to port settings, such as duplex
status and speed.
Command Description
-------- -----------
cleandb Reboot With Clean Database
version Show Firmware Version
ifstats Display Port Statistics
rmstats Display Port RMON Statistics
sysdescr Change System Descriptions
reboot Reboot Unit
oam Display And Change OAM Settings
sfpstats Display SFP DDMI Info
port Display Port Status
->
Press RETURN To Go Back To Main Screen.