Datasheet

www.imcnetworks.com 800-624-1070
General
• Preserves complete end-to-end fiber
connection integrity
• Bi-directional bandwidth control
• Read/write IEEE 802.1Q VLAN-tags
• Supports Extra Tagging (Q-in-Q)
• Supports passive 802.3ah OAM
(Operation, Administration &
Management)
• QoS: IEEE 802.1p-based packet
prioritization (2 queues [high/low] with
8 levels of priority)
• Layer 2 packet switching, store and
forward operation
• Forwarding rate: 14,881 pps for 10 Mbps;
148,810 pps for 100 Mbps
• AutoCross for MDI/MDIX
• Features Auto Negotiation and Selective
Advertising
• Supports Half and Full-Duplex operation
• MTU: Supports over-sized packets up to
1916 bytes per packet
Security
• Password Control
• Multiple Access Levels: User Assigned
Accounts & Access Levels
Management
• SNMP V1 and V2c compatible
• Includes GUI-based iView² software for
remote management and upgrades
• Monitors far-end (remote) status without a
physical presence or separate connection
• IEEE 802.3x Flow Control
• Includes DHCP and TFTP clients
• Supports Telnet
• Includes loopback test modes
(MAC swap)
• Includes LinkLoss and FiberAlert
• Supports the Unified Management Agent
(UMA)
• Includes status LEDs
• RS-232 (Craft) interface for local
management
• Serial cable for direct connection to a
PC’s Serial Port
Ethernet Types Supported
• IEEE 802.3i 10Base-T twisted pair
• IEEE 802.3u 100Base-TX twisted pair
• IEEE 802.3u 100Base-FX or SX fiber
Technical Specifications
Network operators can deploy a single
IE-MiniFiberLinX-II in stand-alone applications. At
the Central Office (CO), a fiber switch connects
via a fiber cable to the IE-MiniFiberLinX-II at the
customer premises. The IE-MiniFiberLinX-II can be
managed from the CO over SNMP or Telnet.
The IE-MiniFiberLinX-II is very versatile and offers
a range of AC and DC powering options. It
also supports 802.3af powering functionality,
allowing it to act as a Powered Device (PD).
The IE-MiniFiberLinX-II can be powered from a
PSE-enabled wireless Access Point, which in turn
can be powered by a remote source such as
the solar panels on a street light. The data is
transmitted over fiber to an iMediaChassis/20 with
iMcV modules in the Central Office to form an
end-to-end managed system.
Typical Application— Single
IE-MiniFiberLinX-II Solution
Application Examples (cont.)
Typical Application— Powering
Options
NID Application
Networking
RoHS Compliant
Fiber Types Supported
• 50/125µm or 62.5/125µm multi-mode fiber
• 9/125µm single-mode fiber
• Single-strand fiber or CWDM
Connectors: RJ-45, and ST or SC
Shipping Weight: 0.30 lbs (0.11 kg)
Dimensions: 0.83”H x 1.80”W x 3.35”D
(2.11 x 4.57 x 8.51 cm)
Environmental
• Humidity: 5% - 95% (non-condensing)
• Operating Temperature: -4° to +167° F
(-20° to +75° C) excluding AC wall adapter;
with AC wall adapter:
+32° to +122° F (0° to +50°C)
• Storage Temperature:
-49° to +185° F (-45° to +85° C)
Power
• DC Input Voltage:
750mA @ 5V to 75mA @ 50 VDC
• IEEE 802.3af Power over Ethernet
Physical Specifications