Datasheet

www.imcnetworks.com 800-624-1070
Full-Featured IE-MiniFiberLinX-II
• VLAN Support— VLAN tagging capability keeps customer
data and SNMP traffic separated
• Troubleshooting Features— FiberAlert, LinkLoss and 802.3ah
Passive OAM (Operations, Administration and Maintenance)
assist in diagnosing potential problems on fiber optic networks
• Loopback Testing— Functionality loops back all frames
arriving on the fiber port (except for the device’s management
traffic). Supports MAC Address swap on Loopbacks
• Bandwidth Control— Fine granularity allows operators to
offer custom levels of service and easily change bandwidth
allocation, remotely, in seconds via SNMP
• Supports the Unified Management Agent (UMA)—
The FiberLinX family has always supported Host/Remote
environments, i.e. managing the Remote from the Host
location. With UMA, operators can centrally manage all
devices installed in an iMediaChassis using only a single IP
address for the chassis. Refer to the UMA data sheet for more
information
• IEEE 802.1Q VLAN compatible
• Valid VLAN IDs are 1 to 4,094
• Port-based VLAN tagging and Q-in-Q (extra tagging)
• Transparency Mode passes all data and respects the VLAN tag or
lack thereof, i.e. allows a mixture of VLAN Tagged and Untagged
traffic
• Configure to support VLAN IDs, filtering/passing up to 32 VLAN IDs
for data, plus an additional VLAN ID for SNMP management
• IEEE 802.1p provides a two-tier queue for differential prioritization
of inbound and outbound traffic, which is especially beneficial for
traffic requiring high priority, such as VoIP
Service providers routinely use IEEE 802.1Q Virtual Local Area Network (VLAN) tagging to secure, separate and differentiate customer traffic. The
IE-MiniFiberLinX-II enables service providers support of multiple VLAN-based applications.
From a central location, network operators are able to receive real-time device and traffic statistics on the remote device, allocate bandwidth, turn
services on or off, initiate loopback testing, modify VLAN settings and adjust QoS policies assigned to different traffic types.
Using the VLAN Functionality on the IE-MiniFiberLinX-II
• Scalability allows transport of data on up to eight wavelengths • Increase bandwidth without the addition of more fiber strands
Optionally, the IE-MiniFiberLinX-II provide for Coarse Wave Division Multiplexing, adding scalability to data delivery
Using Coarse Wavelength Division Multiplexing (CWDM) with the IE-MiniFiberLinX-II
SNMP Management Made Easy
The IE-MiniFiberLinX-II features an SNMP management
agent for monitoring the status and activity on copper
and fiber ports at the remote end. Initial setup and
modifications can be performed in the field via iView²
SNMP application, Telnet/TFTP, or a local serial (CRAFT)
connection.
• Remote, software upgrades via Telnet/TFTP or
management software ( iView²)
• Monitor unit and fiber with real-time monitoring and
statistics
• Change bandwidth “on-the-fly” up to 100 Mbps
• Create a secure management domain to isolate
management domain broadcasts from TX Data ports
on both units
• User-definable unit/port descriptions and information