Datasheet

www.imcnetworks.com 800-624-1070
General
• Preserves complete end-to-end fiber
connection integrity
• Bi-directional bandwidth control
(per port, per direction, per VLAN)
• Read/write IEEE 802.1Q VLAN-tags
• Extra Tagging with Q-in-Q mode (802.1p)
• Supports passive 802.3ah OAM
(Operation, Administration &
Management)
• QoS: IEEE 802.1p-based packet
prioritization (2 queues [high/low] with
8 levels of priority)
• VLAN filtering up to 32 values
• Layer 2 packet switching, store and
forward operation
• Forwarding rate: 14,881 pps for 10 Mbps;
148,810 pps for 100 Mbps
• AutoCross for MDI/MDIX
• Features Auto Negotiation and
Selective Advertising
• Supports Half and Full-Duplex operation
• MTU: Supports over-sized packets up to
1916 bytes per packet
Security
• Password Control
• Multiple Access Levels: User Assigned
Accounts & Access Levels
Management
• SNMP V1 and V2c compatible
• Includes GUI-based iView² software for
remote management and upgrades
• Monitors far-end (remote) status without a
physical presence or separate connection
• IEEE 802.3x Flow Control
• Includes DHCP and TFTP clients
• Supports Telnet
• Includes loopback test modes
(MAC swap)
• Includes LinkLoss and FiberAlert
• Remote capabilities with built-in support
for UMA (IP-less management)
• RS-232 (Craft) interface for local
management
• Serial cable for direct connection to a
PC’s Serial Port
Ethernet Types Supported
• IEEE 802.3i 10Base-T twisted pair
• IEEE 802.3u 100Base-TX twisted pair
• IEEE 802.3u 100Base-FX or SX fiber
Technical Specifications
Networking
Fiber Types Supported
• 50/125µm or 62.5/125µm multi-mode fiber
• 9/125µm single-mode fiber
• Single-strand fiber or CWDM
Connectors: RJ-45, and ST or SC
Dimensions: 0.83”H x 1.80”W x 3.35”D
(2.11 x 4.57 x 8.51 cm)
Environmental
Humidity:
5% - 95% (non-condensing)
Operating Temperature:
-49° to +185° F (-45° to +85° C) DC Telco
-13° to +167° F (-25° to +75° C) DC Adapter
+14° to +122° F (-10° to +50° C) AC Adapter
Storage Temperature:
-49° to +185° F (-45° to +85° C)
Power
AC Wall Adapter:
100 to 240 VAC ±10% input,
5 VDC output, 2A max.
DC Input Voltage:
12 to 48 VDC *, 1 to .02A,
7 to 50 VDC, 1 to 0.1A
IEEE 802.3af Power over Ethernet
* Telco compatible 48 VDC allows for an
absolute maximum voltage of 56.5 VDC.
Physical Specifications
Due to the small size and extended temperature functionality of the IE-MiniFiberLinX-II, its versatility allows it to be
installed in tight spaces without the need to be temperature controlled. In this application, the IE-MiniFiberLinX-II with
Telco Power and Last Gasp is installed in a light pole, converting fiber to copper for an IP camera. In the event of a loss
of connectivity, the Last Gasp TRAP feature notifies the Network Engineer as to whether or not the power has failed or
if a data cable has been broken without having to send a technician to the site.
3) Last Gasp TRAP and the IE-MiniFiberLinX-II