Datasheet

www.imcnetworks.com 800-624-1070 www.mediaconverter.com
* These products have single-strand fiber technology.
Deploy in pairs, or connect to another compatible IMC Networks single-strand fiber product.
For more information go to: www.imcnetworks.com/products/SSFX.cfm
Regulatory Approvals
• FCC Class A • UL/cUL • CE • CSA • CB
Fiber Types Supported
• 1300 nm multi-mode ST or SC
• 1310 nm single-mode/PLUS ST or SC
• 1310 nm single-mode/LONG ST or SC
• 1550 nm single-mode/LONG SC
• 1550 nm single-mode/XLONG SC
• Also available in single-strand fiber
Connectors: RJ-45 and ST or SC
Shipping Weight: 4 oz.
Dimensions: Standard single-slot chassis module
Environmental
• Humidity:
5% - 95% (non-condensing)
• Operating Temperature:
+32° to +122° F (0° to +50° C)
• Storage Temperature:
0° to +160° F (-20° to +70° C)
Power Consumption: 850mA at 3.3V
General
• Preserves complete end-to-end fiber
connection integrity
• Broadcast Storm Protection
• Supports Extra Tagging (Q-in-Q) and
selectable EtherTypes
• Bi-directional bandwidth control
• Supports 802.3ah OAM (Operation,
Administration & Management)
• Read/write IEEE 802.1Q VLAN-tags
• QoS: IEEE 802.1p-based packet
prioritization (2 queues [high/low] with
8 levels of priority)
• Layer 2 packet switching, store and
forward operation
• Forwarding rate: 14,881 pps for 10 Mbps;
148,810 pps for 100 Mbps;
• AutoCross for MDI/MDIX
• Features Auto Negotiation and Selective
Advertising
• Supports Half and Full-Duplex operation
• MTU: Supports over-sized (Jumbo)
packets up to 1916 bytes per packet
Security
• Password Control
• Multiple Access Levels: User Assigned
Accounts & Access Levels
Management
• SNMP V1 and V2c compatible
• Includes GUI-based iView² software for
remote management and upgrades
• Monitors far-end (remote) status
without a physical presence or separate
connection
• IEEE 802.3x Flow Control
• Includes DHCP and TFTP clients
• Supports Telnet
• Includes loopback test modes
(MAC swap)
• Includes LinkLoss and FiberAlert
• Supports the Unified Management
Agent (UMA)
• Includes status LEDs
Ethernet Types Supported
• IEEE 802.3i 10Base-T twisted pair
• IEEE 802.3u 100Base-TX twisted pair
• IEEE 802.3u 100Base-FX or SX fiber
Ordering Information
Technical Specifications
iMcV-FiberLinX-II
For each product listed below in the Ordering Information section, the DISTANCE represents an approximate fiber distance based on industry-standard
fiber specifications and worst-case (connector loss, aged fiber, splices, etc.) installations. Substantially longer distances can typically be achieved. Actual
distances may vary for each installation. For complete power budgets and information on calculating specific distances, visit www.imcnetworks.com/
Support/fpblookup.cfm or contact IMC Networks Fiber Consulting Services at 949-465-3000.
PART NUMBER DESCRIPTION DISTANCE
iMcV-FiberLinX-II TX/SFP and TX/TX
856-14500 iMcV-FiberLinX-II, TX/SFP (requires one SFP/155-ED Module) Various
856-14501 iMcV-FiberLinX-II, TX/SFP (requires two SFP/155-ED Modules) Various
856-14010
iMcV-FiberLinX-II, TX/TX 100 m
iMcV-FiberLinX-II 10/100 Mbps
856-14011 iMcV-FiberLinX-II, TX/FX-MM1300-ST 5 km
856-14012 iMcV-FiberLinX-II, TX/FX-MM1300-SC 5 km
856-14015 iMcV-FiberLinX-II, TX/FX-SM1310/PLUS-ST 40 km
856-14016 iMcV-FiberLinX-II, TX/FX-SM1310/PLUS-SC 40 km
856-14017 iMcV-FiberLinX-II, TX/FX-SM1310/LONG-ST 80 km
856-14018 iMcV-FiberLinX-II, TX/FX-SM1310/LONG-SC 80 km
856-14021 iMcV-FiberLinX-II, TX/FX-SM1550/LONG-SC 80 km
856-14022 iMcV-FiberLinX-II, TX/FX-SM1550/XLONG-SC 100 km
iMcV-FiberLinX-II Single-Strand Fiber Module *
856-14043 iMcV-FiberLinX-II, TX/SSFX-SM1310-SC (1550 rcv) 20 km
856-14044 iMcV-FiberLinX-II, TX/SSFX-SM1550-SC (1310 rcv) 20 km
856-14045 iMcV-FiberLinX-II, TX/SSFX-SM1310/PLUS-SC (1550 rcv) 40 km
856-14046 iMcV-FiberLinX-II, TX/SSFX-SM1550/PLUS-SC (1310 rcv) 40 km
856-14047 iMcV-FiberLinX-II, TX/SSFX-SM1310/LONG-SC (1550 rcv) 60 km
856-14048 iMcV-FiberLinX-II, TX/SSFX-SM1550/LONG-SC (1310 rcv) 60 km
DS-FiberLinX-II-1010
Copyright © 2010 IMC Networks. All rights
reserved. The information in this document is
subject to change without notice. IMC Networks
assumes no responsibility for any errors that may
appear in this document. Specific product names
may be trademarks or registered trademarks and
are the property of their respective companies.
IMC Networks
Fiber Consulting Services
For information call:
TEL: [phone]
1-800-624-1070
(US/CAN)
[phone] (Europe)
[e-mail]
IMC Networks
Headquarters
19772 Pauling
Foothill Ranch, CA 92610
TEL: [phone]
FAX: [phone]
[e-mail]
IMC Networks
Europe
Herseltsesteenweg 268
B-3200 Aarschot, Belgium
TEL: [phone]
FAX: [phone]
[e-mail]
IMC Networks
Eastern US/Latin America
28050 U.S. Hwy. 19 North, Suite 306
Clearwater, FL 33761
TEL: [phone]
FAX: [phone]
[e-mail]