Datasheet

DS-MiniMc-0707
Copyright © 2007 IMC Networks. All rights reserved.
The information in this document is subject to
change without notice. IMC Networks assumes
no responsibility for any errors that may appear in
this document. Specific product names may be
trademarks or registered trademarks and are the
property of their respective companies.
IMC Networks
Fiber Consulting Services
For information call:
TEL: [phone]
1-800-624-1070 (US/CAN)
[phone] (Europe)
[e-mail]
IMC Networks
Headquarters
19772 Pauling
Foothill Ranch, CA 92610
TEL: [phone]
FAX: [phone]
[e-mail]
www.imcnetworks.com
IMC Networks
Europe
Herseltsesteenweg 268
B-3200 Aarschot | Belgium
TEL: [phone]
FAX: [phone]
[e-mail]
IMC Networks
Eastern US/Latin America
18840 US Hwy. 19 North Suite 400
Clearwater, FL 33764
TEL: [phone]-8071 (Latin)
FAX: [phone]
[e-mail]
Fiber Optics Specifications
For each product listed below in the Ordering Information section, the DISTANCE represents an approximate fiber distance based on industry-
standard fiber attenuation specifications. Actual distances will vary for each installation. For complete power budgets and information on calculating
specific distances, visit www.imcnetworks.com/go/fcs or contact IMC Networks Fiber Consulting Services at 949-465-3000.
Ordering Information
Technical Specifications
PART NUMBER DESCRIPTION DISTANCE
AccessConverter TX + Uplink
852-10140 AccessConverter, TX + TX 100 m
852-10141 AccessConverter, TX + FX-MM1300-ST 2 Km
852-10142 AccessConverter, TX + FX-MM1300-SC 2 Km
852-10141-MT AccessConverter, TX + FX-MM1300-MT 2 km
852-10143 AccessConverter, TX + FX-SM1310/PLUS-ST 40 km
852-10144 AccessConverter, TX + FX-SM1310/PLUS-SC 40 km
852-10145 AccessConverter, TX + FX-SM1310/LONG-ST 80 km
852-10146 AccessConverter, TX + FX-SM1310/LONG-SC 80 km
852-10147 AccessConverter, TX + FX-SM1550/LONG-SC 80 km
AccessConverter TX + Uplink Single-Strand Fiber *
852-10153 AccessConverter, TX + SSFX-SM1310-SC (1550rcv) 20 Km
852-10154 AccessConverter, TX + SSFX-SM1550-SC (1310rcv) 20 Km
852-10155 AccessConverter, TX + SSFX-SM1310/PLUS-SC (1550rcv) 40 Km
852-10156 AccessConverter, TX + SSFX-SM1550/PLUS-SC (1310rcv) 40 Km
852-10157 AccessConverter, TX +SSFX-SM1310/LONG-SC (1550rcv) 60 Km
852-10158 AccessConverter, TX + SSFX-SM1550/LONG-SC (1310rcv) 60 Km
Regulatory Approvals:
FCC Class B
UL/cUL, CSA, CE
Dimensions:
0.92”H x 3.50”W x 4.38”D (2.34 x 8.89 x 11.13 cm)
Shipping Weight:
1.1 lbs. (0.50 kg)
AC Input Load:
100/240 ±10% VAC input, 5 VDC output
Operating Temperature:
32° to 104°F (0° to 40° C); 5% to 90%
(non-condensing), 0 to 10,000 ft. altitude
Storage Temperature:
-13° to 158°F (-25° to 70° C); 5 to 90%
(non-condensing)
•
•
Features
Auto-Negotiation of speed and duplex (HDX/FDX)
on copper ports
Layer 2 packet switching, store and forward
operation
Forwarding rate: 14,880pps for 10 Mbps;
148,800pps for 100 Mbps
1024 MAC address learning
MTU: Supports over-sized packets up to 1536 bytes
Full wire speed on all ports
Broadcast storm protection
AutoCross for MDI-II/MDI-X
LinkLoss and FiberAlert
Auto-Negotiation
Diagnostic LEDs
Supports Half- and Full-Duplex operation
Supported Fiber Types
50/125µm or 62.5/125µm multi-mode fiber
9/125µm single-mode fiber
Single-strand fiber
All copper version also available (TX/3 + TX)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Physical
Connectors: RJ-45, and ST, SC or MT-RJ
Uplink available on rear or front of unit
Device includes high-reliability power cube with
country-specific clip
Table-top or wall-mount installation
Standards Compliance
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3u 100Base-FX
IEEE 802.3x Flow Control
•
•
•
•
•
•
•
•
* These products have single-strand fiber technology. Deploy in pairs, or connect to another compatible IMC Networks single-strand fiber product. Go to www.imcnetworks.com/products/SSFX.cfm for
more information