X400Twins Instruction
X400Twins specif ic for your needs!
New Chager X400Twins Released iM·OS System www.imaxrc.com/X400Twins.html www.imaxrc.com/X400Twins.html Touch Screen charger Multiple languages customization Multiple languages customization A whole new product definition method A whole new product definition method Touch Screen Operation 4.3 inch touch screen make the operation more convenient 48 0X 27 2 px inch 4.
iM·OS System www.imaxrc.com/X400Twins.html LiPo Lipo Battery,Single Nominal Voltage: 3.7V,Charge cut-off voltage 4.2V,Discharge cut-off voltage 3.0V LiIon LiIon Battery,Single Nominal Voltage: 3.6V,Charge cut-off voltage 4.1V,Discharge cut-off voltage 2.5V Balance Lipo balance charge use CC-CV charging way. The charger will balance the battery voltage when charging, this only for LiPo battery. Please connecting the balance port when charging and discharging. Support 2-6 cells.
1 X400Twins Fundamental Function www.imaxrc.com/X400Twins.html Touch Screen Preparing Connection Channel2 OutTemp. Temp. put Port Sensor PC Sensor Channel2 LINK Channel1 Balance Port Balance Port DC Output 5V 2.1A Channel1 Output Port www.imaxrc.
X400Twins is a professional RC model battery charger,please view the manual before Accessories list using. If you are a fresh man please read this entire operating manual completely before X400Twins includes 2pcs Balance board,2pcs Output cable and 1 pc manual. using. 【Warning: 】The warning of charger operation and disclaimer, Please read and abide by the following terms before operation. 1. This is a sophisticated hobby product.
Connecting X400Twins 2: Plug output cable into the output port of the charger, making sure to observe Please follow the below steps connecting: correct polarity (red to red and black to black). 1: Please insert the charger Cable into the ac adapter and then insert the ac adapter cable in the outside ac power supply socket. 【NOTE】 USB support 5V 2.1A charging voltage,and also use for iPad / iPod / iPhone / HTC and other intelligent electronic equipment.
3: Plug your battery into the output cable. if you are charging a LiPo battery, plug 4: Sarting X400Twins the balance board into the output port and then plug its balance connector into the Startup X400Twins to enter the main interface ( Image 1 ). matching balance board. Image 1 Showing“Warning and Disclaimer” 2 seconds and will know the copyright and security information ( Image 2 ).
Disclaimer Copyight COMPANY: iMaxRC CO.,LTD. ADDR: F4 201-205, F518 IDEALAND Baoyuan Road, Baoan, Shenzhen,P.R.C Example 1:Choose a set of LiPo battery charging,please follow the below steps: Step 1: Touch Type( Image 5 ) Enter into the “Type interface”, and then Touch :LiPo ( TEL: +86 755 89830228 FAX: +86 755 29558361 Image 6 ) will Enter into main interface go on the next step. E-mail: info@imaxrc.
Step 2: Touch ‘Mode’ icon( Image 7 ) to enter into Mode interface. Please choose Step 3: Touch Cells icon ( Image 9 ) to enter into Cells interface. Please set battery packs battery charge mode ( Image 8 ) and go back to main interface to continue setting. by sliding ( Image 10 ). Touch OK to go back to main interface and continue setting. 1 Present Setting 1 Battery Type: LiPo Mode: Balance 2 Cells: 2Cells 7.4V Current: C 2.0A D 1.
Step 4: Touch Current icon ( Image 11 ) to enter into Current inter- face. Please set charge Step 5: If you often use the same battery, please touch Save icon ( Image 13 ) to enter current by sliding ( Image 12 ). Touch OK to go back to main interface and continue setting. into Save interface. Touch Unused icon to save the data and it will be easy for you to charge next time.
Step 6: You could load your previous data according to X100’s load function. Touch Load Step 7: Touch Start icon ( Image 17 ) to enter into Start interface. The system will check icon ( Image 15 ) to enter into Load inter- face. Choose the data you want to load ( Image battery status automatically. If everything is OK, the charger will begin to charge.( Image 16 ).
【NOTE】The charger will pop-up window when the battery is fully charged. Touch OK to Example 2: If you want to charge a pack of NiMh battery, please execute the oper- finish charging process ( Image 19 ). ation as follows: Step 1: Touch Type icon ( Image 21 ) to enter into Type interface. Touch NiMh icon to go back to main interface and continue setting ( Image 22 ). Present Setting Battery Type: Type Cells Mode Current LiPo Mode: Balance Image 19 Cells: 2Cells 7.
Step 2: Touch Mode icon ( Image 23 ) to enter into Mode interface. Touch Charge icon ( Step 3: Touch Cells icon to enter into Cells interface. Please set NiMh battery packs by Image 24 ) to go back to main interface and continue setting. sliding ( Image 25). Touch OK to go back to main interface and continue setting ( Image 26).
Step 4: Touch Current icon ( Image 27 ) to enter into Current interface. Please set charge Step 5: Touch Start icon ( Image 29 ) to enter into Start interface. The charger will check current by sliding ( Image 28 ). Touch OK to go back to main interface and continue setting. battery status automatically. If everything is OK, the charger will begin to charge ( Image 30 ). Image 27 Image 29 Image 28 Image 30 【NOTE】Please set charge current in charge mode and dis- charge current in discharge mode.
【NOTE】The charger will pop-up window when the battery is fully charged. Touch OK to Example 3: If you want to charge a pack of Pb battery, please execute the opera- finish charging process ( Image 31 ). tion as follows. Step 1: Touch Type icon ( Image 33 ) to enter into Type interface. Touch Pb icon ( Image 34) to go back to main interface and continue setting. Image 30 【NOTE】The charger will send out an alert and pop-up window if the battery packs’ setting is incorrect.
Step 2: Touch Mode icon ( Image 34 ) to enter into Mode inter- face. Touch Charge icon ( Step 3: Touch Cells icon ( Image 36 ) to enter into Cells inter- face. Please set Pb battery Image 35 ) to go back to main interface and continue setting. packs by sliding ( Image 37 ). Touch OK to go back to main interface and continue setting. Image 34 Image 36 Image 35 Image 37 【NOTE】 There are some options in Mode interface ( Image 35 ). Please set according to your requirement.
Step 4: Touch Current icon ( Image 38 ) to enter into Current in- terface. Please set charge Step 5: Touch Start icon ( Image 40 ) to enter into Start interface. The charger will check current by sliding ( Image 39 ). Touch OK to go back to main interface and continue setting. battery status automatically. If everything is OK, the charger will begin to charge. ( Image 41 ) Image 38 Image 39 Image 40 Image 41 【NOTE】Set charge current in charge mode and discharge current in discharge mode.
2 【NOTE】The charger will pop-up window when the battery is fully charged. Touch OK to finish charging process ( Image 42 ). Image 42 X400Twins Experiments 【NOTE】The charger will send out an alert and pop-up window if the battery packs’ setting is incorrect. ( Image 43 ) All Lipo battery packs setting are the same operation. Image 43 www.imaxrc.
iM·OS SYSTEM ADVANCED APPLICATION Touch “Cut off Low Input”( Image 46 ), the information bar on left will skip into setting iM·OS SYSTEM is brand-new software of charger which was Independently research and menu( Image 47 ), touch “OK” after setting done, it will turn back to interface ( Image 47 ), develop by iMaxRC. It is the first operation system in the world especially to support touch then you can go on with setting of other features.
Cut off Low Input Cut off Low Input Cycle Times Range of setting:10-24V. Lowest cut off input voltage, charger will stop charging/ discharging when input voltage is lower than setting value. Cut off temperaturey Cut off Temperature Backlight Level Range of setting: 40-80°C. Cut off Temperature, charger will stop charging/ discharging when temp of batteries is lower than setting value. Buzzer Cycle Time Range of setting: 1-6 times. Backlight Level Range of setting: 1-10, Brightness level.
3 IMPORTANT REMIND www.imaxrc.
Please follow the instruction to operate your X400Twins charger, to insure safety of you NEVER use X400Twins charger under following operating environment: the environ- and charger, and use it easily. Please keep manual within easy reach, to be easy refer- ment full of floating dust, smoke from burning or cooking in air. The place have ultrasonic ence for you and other user. humidifier (for unfiltered tap water) working on.
All specifications and figures are subject to change without notice.
