MANUAL OF LED PROGRAM CARD V3.0 www.imaxrc.
Using program card Program Card can display and modify the parameter item by the 4 digits LED and 4 buttons. When every parameter setting is done, push “write” key, all parameters can be saved into ESC automatically. The two of all parameters can be set quantificationally. 1. Low Voltage Protection Threshold: user can set proper voltage threshold according to cell quantity in range of 00.0-49.9V. 2. Start power: can be set in range of 00% - 29%.
The keys function KEY To move the cursor horizontally. To modify the FUNCTION value which is more than one digit. WR Two functions: 1. To browse every parameter. 2. To modify option or value of the parameter when entering this parameter item. The value is from 0 to 9 in loop. Two functions: 1. When display a parameter item, press the key to enter this parameter item.Then the parameter value is flashing, user can modify the value. 2.
Program procedure 1. Connect the PPM wire of ESC to program card properly. 2. Connect the battery to ESC, program card will display “READ”, the program card can automatically detect the ESC is used for Car or for Plane and read parameters from the ESC. 3. Display the version of the ESC. If it is the ESC for Plane and will display “P x.x”; if it is the ESC for Car and will display “C x.x”, then display the first item after one second. 4. Press key to browse parameter items. 5.
Configurable parameter with program card When connecting Program Card and ESC, the program card can automatically detect the ESC is used for Car or for Plane and read parameters from ESC:
www.imaxrc.com All specif icat ion s an d f igu res are su bject t o ch an ge w it h ou t n ot ice.