User Manual

SPECIAL FEATURES
Optimized Operating Software
IMAX B6AC V2 features the so-called AUTO function that set the feeding current during
the process of charging or discharging. Especially for lithium batteries, it can prevent the
overcharging which may lead to an explosion due to the user's fault. It can disconnect the
circuit automatically and alarm once detecting any malfunction. All the programs of this
product were controlled through two way linkage and communication, to achieve the
maximum safety and minimize the trouble. All the settings can be configured by users!
Battery Memory (Data Store/Load)
The charger can store up to 10 different charge/discharge profiles for your convenience.
You can keep the data pertaining to program setting of the battery of continuous charging
or discharging. Users can call out these data at any time without any special program
setting.
Terminal Voltage Control(TVC)
The charger allows user to change the end voltage. (for expert user only)
PC Control Software “Charge Master”
The free “Charge Master” software gives you unparalleled ability to operate the charger
through the computer. You can monitor pack voltage, cell voltage and other data during
the charging, view charge date in real-time graphs. And you can initiate, control charging
and update firmware from “Charge Master”.
Internal Independent Lithium Battery Balancer
IMAX B6AC V2 employs an individual-cell-voltage balancer. It isn't necessary to connect
an external balancer for balance charging.
Balancing Individual Cells Battery Discharging
During the process of discharging, IMAX B6AC V2 can monitor and balance each cell of
the battery individually. Error message will be indicated and the process will be ended
automatically if the voltage of any single one cell is abnormal.
Adaptable to Various Type of Lithium Battery
IMAX B6AC V2 is adaptable to various types of lithium batteries, such as LiPo, LiIon and
the new LiFe series of batteries.
03 ·
B6AC V2
Smart Phone Control via WiFi Module (both iOS and Android)
Finally, your charger gets its own apps. This charger can be controlled and operated by
smart phones via WiFi module(option part SK-600075).