User's Manual

9
2. Pass the sheet of labels below the laser scanners once again, pausing at each pair of
labels until they have been verified. It is most convenient to do this in the reverse
direction, since you will already be on the bottom set of labels.
3. The system will put a “VER” confirmation next to each label identification number
whenever the written RFID number matches the printed barcode ID, as in the example
below. An audible confirmation is also provided.
4. If the “VER” confirmation does not appear for any label—
a. Move that label back under the scan region. If the “VER” confirmation still does
not appear:
b. Click on “New Sheet.” The following dialogue box (Figure 9) will appear:
c. Click OK to clear the sheet fields without adding the tags to the order list.
d. Repeat the RFID write and verify process for this sheet again.
e. Click Cancel to cancel the new sheet operation. You can then try again to verify
the tags that were missed.
Figure 9