User's Manual

4
I. Choose the program group you wish to include the software in and press the
Continue button on the Choose Program Group Installation dialogue box (Figure 3)
to begin the installation. When the installation is complete, click on the OK button to
exit the installation set up of the software for the DataGuard rf UHF Label
Programmer.
Introduction
The Imation DataGuard rf UHF Label Programmer allows the user to write (“Program”) the RFID
tags embedded in barcode labels before the labels are removed from their printed sheets. The
programmer has twin laser readers that pick up the barcode information as the labels pass below
the readers and converts the laser barcode information to RFID identification data. Twin RFID
antennas use those identification data to initialize the RFID tags in the labels. The RFID
antennas can also read the RFID data in order to display the label information or to verify that
the laser barcodes are identical matches with the RFID tags.
The startup screen appears below.
Figure 3