User's Manual

If one or more of the tags was written but not verified the following warning will appear:

Press OK to clear the sheet results and rescan the sheet, or continue to the next sheet.

Press Cancel to go back and verify the tags that were missed on the current sheet.

Order Complete

Clicking this button triggers the tests for a new sheet as well as an additional test that

compares the total number of tags written and verified to the number of tags in the order.

If the totals do not match, the following warning will appear:

Press OK to ignore this warning and continue on to the next order or press Cancel to go

back and scan additional tags.

3. RFID Read

The RFID Read option allows the user to scan the RFID tags on the labels without regard for the

barcode label contents. The raw RFID tag information appears in each respective column. This

mode is useful for verifying that the RFID reader can read the chip contents.

Figure 12

Figure 13