DEFENDER™ F200+BIO USER GUIDE Contents Introducing Defender™ F200+Bio Minimum System Requirements Imation Documentation 2 2 2 Getting Started Opening and closing a device Attaching the lanyard loop Personalizing a device 4 4 4 6 Accessing data on the device Logging into and out of the device Saving and opening files Disconnecting the device 8 8 9 9 Troubleshooting 10 Warranty Information 12
INTRODUCING DEFENDER™ F200+BIO Defender™ F200+Bio is a USB (Universal Serial Bus) portable flash drive with built-in biometric security and data encryption. Figure 1-1: Defender F200+Bio This guide is designed to help you set up your Defender F200+Bio device with minimal effort. MINIMUM SYSTEM REQUIREMENTS Defender F200+Bio comes with built-in Imation Defender ACCESS Standard™ software on its application partition.
INTRODUCING DEFENDER™ F200+BIOcont. • Managing devices • Protecting the device from viruses • Troubleshooting Online Help is also available with ACCESS Standard software. To view the ACCESS Standard User Guide • From the root directory of the application partition, double-click the UserGuide.pdf file. Note: You need Adobe® Reader® (http://www.adobe.com/acrobat) to view the documentation. To view online Help • When ACCESS Standard is open, click Help on the page for which you want more information.
GETTING STARTED OPENING AND CLOSING A DEVICE Defender™ F200+Bio has an integral case that opens by removing a large front cap. . To open a device • Grasp the front and rear caps and pull apart. To close a device • Slide the device into the front cap and squeeze the caps together. ATTACHING THE LANYARD LOOP Defender F100 and Defender F150 come with a lanyard loop that allows you to attach it to lanyards or other objects. To attach the lanyard loop (optional) 1.
GETTING STARTEDcont. 2. Grip both ends of the lanyard loop and bend the ends towards each other in a circle. 3. Insert the small end into the larger barrel. 4. Turn the larger barrel to thread the parts together. 5. When the small bullet is completely inside the larger barrel, the loop is secure and ready for use.
GETTING STARTEDcont. To remove the lanyard loop 1. Turn the barrel (counter-clockwise) to loosen the small bullet. 2. When the small bullet is completely separated from the larger barrel, pull the lanyard loop apart. PERSONALIZING A DEVICE When you plug in a new device, you must personalize it before you can use the authentication and private partition features. The device uses pre-installed ACCESS Standard software to guide you through the personalization process.
GETTING STARTEDcont. To personalize the device 1. Plug the device into the USB port of the computer. If Autorun does not automatically start ACCESS Standard, double-click the Start.exe file from the root directory on the application partition. (If necessary, in the notification area at the far right of the taskbar, click the Imation Defender icon, and then click Personalize Device from the menu.) 2. On the initial ACCESS Standard page, click Personalize Device. 3.
ACCESSING DATA ON THE DEVICE After you personalize a device, only registered users can authenticate to it. Authentication involves logging into the device using a password, fingerprint, or both. The authentication method you must use depends on the capabilities of the device and the profile applied to the device. After you successfully log in, you can save files to, and open files from, your private partition.
ACCESSING DATA ON THE DEVICE cont. SAVING AND OPENING FILES When you plug in your device both the application drive and the private partition display in a file manager, such as Windows® Explorer, with an associated drive letter for each partition. Application drive Private partition Once you log into the device, you can open files on your private partition using the appropriate program or a file manager.
TROUBLESHOOTING If you experience difficulty using Defender™ F200+Bio after following the instructions in this User Guide, read the following troubleshooting information. • Check to make sure the device is plugged in properly. • Check the light emitting diode (LED) status of Defender F200+Bio. • Check the Frequently Asked Questions section at Imation.com/support.
TROUBLESHOOTING cont. Table 4-1: LED states for devices State Description of state Solid red The device is locked. Blue LED Indicates a data transfer activity for all devices. Flashing red and blue The device no longer has valid firmware. Difficulty closing device cap If the device cap is difficult to close, check the red rubber sealing ring on the main part of the device.
WARRANTY INFORMATION Limited Warranty: If any defect in material or manufacture appears within 5 years of the date of original retail purchase of this product, it will be repaired or replaced at Imation’s option. Proof of purchase is required to obtain warranty service. This warranty does not apply to normal wear or bundled software. Imation will not be liable for any lost data or other indirect, incidental or consequential damages.
