User manual
bACkup to eSAtA
To configure data back up to a direct attached system via the eSATA
port, make sure the eSATA device is connected and powered on, then
follow these steps:
1. From the NAS tab, click the Local Backup menu item, then click
the Local Backup tab.
2. Move your pointer over the eSATA row and click on Settings.
3. Click the Backup to eSATA radio button.
4. Choose a Backup Method. Make sure you understand the available
options Add Directory, Copy and Synchronize, and how each
option aects data on the destination eSATA device (see page 65).
5. Select the schedule type you want for the backup.
6. Click the Next button and choose files and folders.
7. When done, click the Run button to begin backup immediately,
or Save to begin according to the configured schedule. The new
backup schedule is in eect.
reStore From eSAtA
To launch a data restoration from an attached eSATA device, follow
these steps:
1. From the NAS tab, click the Backup menu item.
1. Click NAS tab > Backup > Local Backup tab.
2. Move your pointer over the eSATA row and click on Settings.
3. Click the Restore from eSATA radio button.
4. Choose the Backup Method used to manage the data transfer.
Make sure you understand the options Add Directory, Copy and
Synchronize, and how each option aects data on the NAS (see
page 65).
5. Click the Next button and choose files and folders.
6. Click the Run button to begin the data restoration process.
NAS > Local Backup > Local Backup > eSATA
67
NAS > Local Backup > Local Backup > eSATA, Choosing Files and Folders
NAS > Local Backup > Local Backup > eSATA, Restore from eSATA