User manual

tCp/ip SettingS
1. From the Administration tab, click the Network menu item, move
the pointer over the desired ID, and click the TCP/IP Settings icon.
2. Select a Network Speed from the pull-down menu.
3. To set IP Properties, choose one of two methods:
✴ Check the box marked Obtain an IP Address automatically from
a DHCP; or
✴ Enter a fixed (static) IP Address, Subnet Mask, Gateway IP
Address, DNS Server IP Address, and Secondary DNS Server IP
Address in the fields provided.
4. Click the Submit button to apply these settings.
ipv6 SettingS
To configure the DataGuard Appliance for use with the IPv6 protocol,
follow these steps:
1. From the Administration tab, click the Network menu item, move
the pointer over the desired ID, and click the IPv6 Settings icon.
2. Select a Network Speed from the pull-down menu.
3. Check the Enable Service box.
4. To set IP Properties, choose one of two methods:
✴ Check the box marked Obtain an IP Address automatically
from a DHCP; or
✴ Enter a fixed (static) IPv6 Address, Subnet Mask, Gateway IP
Address, DNS Server IP Address, and Secondary DNS Server IP
Address in the fields provided.
5. Click the Submit button to apply these settings.
Administration > Network > TCP/IP Settings
47
✓
✓
✓
✓