User manual

Device > Component List > Controller > Settings
Controller
• View > Information:
✴ Controller ID
✴ Part Number
✴ Serial Number
✴ Alias
✴ Readiness Status
✴ Operational Status
✴ Power On Time
✴ Boot Loader Version
✴ Firmware Version
✴ Software Version
✴ SCSI Protocol Supported
✴ Cache Usage Percentage
✴ Dirty Usage Percentage
✴ Boot Loader Build Date
✴ Firmware Build Date
✴ Software Build Date
• View > Advanced Information:
✴ Memory Type and Size
✴ Controller Role
✴ Flash Type and Size
✴ NVRAM Type and Size
✴ Preferred and Actual Cache Line Size
✴ Coercion and Method
✴ SMART Status and Polling Interval
✴ Write-Back Cache Flush Interval
✴ Physical Drive Temp. Threshold
✴ Enclosure Polling Interval
✴ Adaptive Write-Back Cache
✴ Host Cache Flushing
✴ Forced Read Ahead
✴ HDD Power Levels
✴ Spin Down Type
✴ Power Saving Idle, Standby,
and Stopped Time
• View > Statistics:
✴ Read Data Transferred
✴ Write Data Transferred
✴ Read Errors
✴ Write Errors
✴ Non-Read/Write Errors
✴ Read IO Request
✴ Write IO Request
✴ Non-Read/Write Request
✴ Statistics Start Time
✴ Statistics Collection Time
• Settings:
✴ Controller ID
✴ Alias
✴ Enable SMART Logging
✴ SMART Polling Interval [1-1440]
✴ HDD Power Levels
✴ Spin Down Type
✴ Power Saving Idle, Standby, and
Stopped Time
✴ Enable Coercion and Coercion
Method
✴ Write-Back Cache Flush Interval
✴ Physical Drive Temperature
Threshold[50-60]
✴ Enclosure Polling Interval
✴ Adaptive Write-Back Cache
✴ Host Cache Flushing
✴ Forced Read Ahead
24
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓