User manual

bACkup to eSAtA

To conﬁgure data back up to a direct attached system via the eSATA

port, make sure the eSATA device is connected and powered on, then

follow these steps:

1. From the NAS tab, click the Backup menu item, then click the

Local Backup tab.

2. Move your pointer over the eSATA row and click on Settings.

3. Click the Backup to eSATA radio button.

4. Choose a Backup Method. Make sure you understand the available

options Add Directory, Copy and Synchronize, and how each

option affects the data on the destination eSATA device.

5. Select the schedule type you want for the backup.

6. When done, click the Run button to begin backup immediately,

or Save to begin according to the conﬁgured schedule. The new

backup schedule is in effect.

reStore From eSAtA

To launch a data restoration from an attached eSATA device, follow

these steps:

1. From the NAS tab, click the Backup menu item, then

1. Click NAS tab > Backup > Local Backup tab.

2. Move your pointer over the eSATA row and click on Settings.

3. Click the Restore from eSATA radio button.

4. Choose the Backup Method used to manage the data transfer.

Make sure to understand the available options Add Directory, Copy

and Synchronize and how each option deals with data on the NAS.

5. Click the Run button to begin the data restoration process.

NAS > Backup > eSATA