User manual

dHCp Server FunCtion
The DataGuard Appliance includes an embedded DHCP server that
can be used to function on the subnet or dedicated network to which
it is attached. Make sure it is appropriate or desirable to enable DHCP
service before using it. To configure DHCP Server Settings:
1. From the Administration tab, click the Network menu item, then
click the DHCP Server button.
2. Check the Enable DHCP Server button to activate.
3. Enter a value for the IP Range.
4. Set a Lease Time for the period you want the server to remain
active.
5. Click Submit to apply the new settings, or click Cancel to return to
the previous settings.
DHCP
Server
Settings Description
Enable DHCP
Server
Choose to enable or disable DHCP service on the attached
network or subnet.
IP range
Assign a suitable range of IP address to use for DHCP
assignment in the text boxes.
Lease Time
Choose the amount of time allowed for IP address leasing.
Setting up ddnS
DDNS can be used to maintain and update DNS information to make
the system easier to locate from the web.
1. From the Administration tab, click the Network menu item.
2. Click the DDNS Settings button.
3. Select a DDNS server from the drop-down menu and enter a Host
Name, User Name, and Password.
4. Click the Submit button.
DDNS
Settings Description
Enable DDNS
Server
Choose to enable or disable DDNS service.
DDNS Server
Choose a DDNS service domain from the listed websites.
Host Name
Enter the host name used for DDNS service.
User Name
Enter the user name used for DDNS service.
Password
Enter the password used for DDNS service.
Administration > Network > DHCP Server Settings
Administration > Network > DDNS Settings
46