User manual

mAC AFp
Use the Mac AFP Settings menu to configure and activate Apple Filing
Protocol service to enable Mac users to access and use the DataGuard
Appliance from the network.
To configure Mac AFP:
1. Click NAS tab > Protocol Control.
2. Move your pointer to expand the MAC AFP row of the Protocol
Control list and click on Settings.
3. Click Enable Services (enabled by default) to enable AFP service.
4. (Optional) Enter a Login Message. This message appears in the
Welcome screen when logging in from a Mac client.
5. Click the Save button to apply and save the settings.
printer Server
The embedded print server is disabled by default. This must be
enabled to connect a network printer to the DataGuard Appliance
with a USB cable.
To enable or disable :
1. Click NAS tab > Protocol Control.
2. Move your pointer to expand the Printer Server row of the
Protocol Control list and click on Settings.
3. Click to check Enable Services (disabled by default) to enable
printer service. Click the same box to remove the check mark to
disable printer service.
4. Click the Save button to apply and save the settings.
webdAv
Web-based Distributed Authoring and Versioning (WebDAV) support
for remote web content editing. It is enabled by default.
To enable or disable :
1. Click NAS tab > Protocol Control.
2. Move your pointer to expand the WebDAV row of the Protocol
Control list and click on Settings.
3. Click to check Enable Services (enabled by default) to enable
WebDAV. Click the same box to remove the check mark to
disable WebDAV.
4. Click the Save button to apply and save the settings.
dFS
The DataGuard Appliance supports Distributed File DFS for Windows
which is disabled by default. DFS allows for control of access to folders
on the DataGuard Appliance by remote clients. To use DFS, it must
first be enabled by clicking on the Enable icon. Once enabled, you can
add client configurations. Follow the instructions below to configure
NFS access.
Click NAS tab > Protocol Control.
5. Move your pointer to expand the DFS row of the Protocol Control
list and click on Add.
6. In the Add client menu, Enter the Storage name (client name),
the Share Folder allowed access to the client and the Alias of
the client.
7. Click the Save button to apply and save the settings.
8. To view the list of clients configured for access, click on the
View icon. Configurations can be deleted using this list.
77