User manual

reStore factory default
This function allows you to restore any or all settings to their default
values, including:
CIF Settings FTP Settings AFP Settings SNMP Settings
NFS Settings WebDAV Settings Network Settings
To restore the factory default settings:
1. From the Administration tab, click the Restore Factory Default
menu item.
2. Check the boxes for each setting you want to reset to default
value.
3. Click the Submit button.
4. Click OK to confirm, or click Cancel to leave the current settings
intact.
Administration > Restore Factory Default
fIrmware updateS
Before any firmware update, make sure you have the latest firmware
image file on your desktop computer.
1. From the Administration tab, click the Firmware Update menu
item. The Firmware Update panel will appear showing the current
Image Version Number.
2. Click the Browse (or Choose File) button to locate the firmware
image file, then click Open. The firmware image file will appear in
the in the field.
3. Click the Submit button.
4. When the update is completed, you will see a message that tells
you to reboot the subsystem. Click the OK button to restart the
system.
Administration > Firmware Update
!
Caution
Use this feature only when required, and only on the
settings that you must reset to default in order to set them
correctly.
Caution
Use this feature only when required, and only on the
settings that you must reset to default in order to set them
correctly.
!
62