User manual

front panel—t5r
The front panel provides access to the hard drive carriers, RDX
cartridge, power button, one USB 2.0 connection (USB Port 1)
and LCD display.
Feature Description
Network
LEDs
Indicators flash blue when network connection is active.
USB Port
Supports USB 2.0 for One-Plug-Auto-Service (OPAS), USB
printer, external USB hard drive or USB uninterruptable power
supply. This port is labeled USB1 in the Management Interface.
LCD Display
and
Controls
Displays name and IP address for the device. Use with the
Select and Enter buttons to view critical system statistics or
configure the IP address.
One-Touch
Backup
Button
and LED
Initiates data backup for a client system with backup schedule
configured. During backup, the LED below illuminates; when
the backup is complete, a buzzer sounds once.
Disk
Activity
LED
Indicator flashes blue to show read/write activity.
Disk Status
LED
Indicator glows blue when the disk is functioning normally,
amber when the disk is rebuilding, and red if the disk has failed.
RDX Dock
Accepts any RDX cartridge. Read manual for RDX system
before using. LED on eject button glows green when RDX
cartridge is installed, and flashes amber when the cartridge
is being ejected.
Power
Button and
Status LED
Button powers DataGuard Appliance on and off. Status LED on
power button glows blue when the power supply is functioning
normally, red during initialization, and amber in case of a critical
disk error.
T5R Front Panel View (door closed)
Power Button
and Status LED
RDX Eject
Button
RDX Dock
RDX Force
Eject
Disk Status
LED
Disk Activity
LED
Security Door
Enter Button
One-Touch
Backup Button
and LED
LCD Display
USB Port
Network LEDs
Select Button
6