User manual

bACkground ACtivity SCHedule Setup
The background activities Media Patrol, Redundancy Check and Spare
Check can be scheduled during off-peak hours. To add a scheduled
background activity:
1. From the Administration tab, click the Background Activity menu
item.
2. Click the Scheduler button.
3. Click the Add Schedule button and complete these settings:
Schedule
Item Description
Scheduler
Name
Select the option to schedule: Media Patrol, Redundancy
Check, or Spare Check.
If you select Redundancy Check, complete the following
settings:
• Auto Fix—Attempts to repair the problem when it finds
an error.
• Pause on Error—The process stops when it finds a non-
repairable error.
• Select LD—Select at least one logical drive on which
Redundancy Check will run.
Enable This
Schedule
Click to toggle enable/disable of the schedule.
Start Time
Choose the time of day on which to begin the scheduled task.
Recurrence
Pattern
Choose to establish a schedule pattern on a Daily,
Weekly or Monthly basis. The menu changes according
to the pattern chosen. Complete the schedule using the
appropriate menu.
Start From
Select the date on which the scheduled activity is to
begin.
End On
Choose one of the options to discontinue the activity. The
options are:
• No End Date—the activity continues indefinitely,
• End After—choose a fixed number of times to perform
the activity, or
• Until—choose to continue the activity until a specified date.
Click the Save button to save and apply the schedule.
To change a scheduled background activity:
1. From the Administration tab, click the Background Activity menu
item.
2. Click the Settings button.
3. Make the changes and click the Confirm button.
Administration > Background Activity > Add Schedule
55