User manual

Feature Description
Ethernet Ports
and Indicator
LEDs
Allows connection to a LAN or dedicated storage
network or subnet. The LED at the left of each port
glows briefly when a link is established, and blinks when
the port is being used. The LED at the right of each port
glows green at 1000 Mbps and amber at 100 Mbps. At
10 Mbps, the indicator does not illuminate.
eSATA Port
Provides connection to external SATA storage.
VGA Output
Lets a qualified technician or engineer connect a VGA
monitor for managing the system out-of-band. Should
only be used for diagnostics and technical support.
System
Cooling
Fan
Provides air cirulation to system and keeps drives from
overheating. Leave several inches of space behind this
opening.
Power
Supply
Vents
Provide air cirulation to power supplies. Do not block.
USB Ports
Connections are numbered 1–5 for reference in the
Management Interface.
Ports 2–3 (lower and upper left) support USB
Specification 3.0.
Ports 4–5 (lower and upper right) support USB
Specification 2.0.
Port 1 is on the front panel.
Reset
Lets an administrator perform a hardware reset.
Power
Connections
Accepts one cord for each power supply. Use the cord
shipped with the device and connect it to a suitable
power source.
Back panel—r4
The back panel contains power and network connections, maintenance
features and cooling vents.
Power Supply
Vents
Ethernet Ports
and Indicator
LEDs
System
Cooling Fan
VGA
Output
eSATA
Port
Reset
Power Connections
USB
3.0 Ports
USB
2.0 Ports
5