User manual

lun map management
The LUN Map function allows you to control which storage arrays are
visible to specified computers as a means of access control for a SAN.
To enable LUN Mapping:
1. Check the Enable LUN Masking option.
To add an initiator:
2. From the Administration tab, click the LUN Map menu item.
3. Click the Add Initiator button at the upper right of the panel.
4. Enter the full name in the Initiator Name field and click the Submit
button.
5. Type the name of the initiator. An iSCSI initiator name is the iSCSI
name of the initiator device and is composed of a single text string.
Obtain the initiator name from the initiator utility on your host
system. The newly added initiator will be added in the LUNMap list.
To define a LUN Map:
1. From the Administration tab, click the LUN Map menu item.
2. Click the LUN Mapping button.
3. Select an initiator from the drop-down menu, then click the Next
button.
4. Drag-and-drop a logical drive from the Logical Drive pane to the
Initiator pane.
5. In the LUN Mapping pane, indicate the arrays you wish to make
visible by putting a unique number in the LUN field (on the Initiator
pane).
6. When done, click the Assign button.
7. Click the Submit button.
Storage > LUN Map > Add Initiator
Storage > LUN Map
✓
43