User manual

component lISt
From the Device tab, select the Component List menu item to display
the device ID, operational status, enclosure type, and status description
of all enclosures. To view details, click the red triangle at right. A panel
like the one below will appear.
Move your pointer just below the ID for each item to view details and
confirm or change settings. Here are the options for each component:
Device > Component List > Overview
enCloSure
• View:
✴ Click the View button to display enclosure ID and type;
power supply unit ID and status; and information on the
blower, temperature, and voltage
• Settings:
✴ Click the Settings button to display warning temperature
and critical temperature for the unit; you can also change
these settings and confirm or cancel the changes
• Locate:
✴ Click to activate; the enclosure will sound an audible alarm
and the System Status LED will blink for one minute
Controller
The controller manages physical hard drives, representing them as
logical drives as configured by the user. It also provides an additional
memory cache for read/write operations of the RAID device. Use
these menus to view or configure controller settings:
• View:
✴ Move your pointer over the controller and click the View
button to display the controller information list.
• Settings:
✴ Move your pointer over the controller and click the Settings
button.
✴ Make setting changes as required (see below for details).
✴ Click the Save button.
See the illustration and list on the next page to view the available
parameters.
23
✓
✓
✓
✓
✓
✓
✓