User manual

Important Safety InStructIonS
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
Note: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. This Class A digital apparatus complies with Canadian ICES-003.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
ImatIon product Support
If you experience problems with setup and/or use of your new DataGuard
Appliance, please review this product manual or visit http://www.imation.com
and click on the support link.
For the DataGuard Appliance Compatibility Guide, go to:
https://support.imation.com/app/answers/detail/a_id/220
For DataGuard Appliance Rack Mount Instructions, go to:
https://support.imation.com/app/answers/detail/a_id/221
Your DataGuard Appliance should now be operating smoothly—and we want
to help you keep it that way. For the fastest product support and the latest
drivers and downloads, register your DataGuard Appliance today at register.
imation.com.
Limit ed Warranty: If any defect in material or manufacture appears within
3 years of the date of original purchase of this product, it will be replaced
or the purchase price refunded. For more information, go to www.imation.
com. This warranty does not apply to normal wear or damage from misuse,
abuse or accident. Imation will not be liable for any lost data or other indirect,
incidental or consequential damages. This warranty gives you specific rights—
you may have other rights that vary from country to country.
FOR SALES IN AUSTRALIA: Imation Limited Warranty against defects for
3 years from purchase date. Product will be replaced or refunded at our
option. At your cost, deliver product & proof of purchase to Imation at Unit
2, 1 Coronation Ave, Kings Park NSW, Australia 2148 Ph 1800 225 013. Further
details at www.imation.com/en-au or contact us at [e-mail].
Your benefits under this Imation warranty are in addition to your other
rights and remedies under a law in relation to this product. Our goods come
with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure.
Imation and the Imation logo are trademarks of Imation Corp. RDX is a
registered trademark of Tandberg ASA. All other trademarks are the property
of their respective owners.
© Imation Corp
Imation Enterprises Corp 1 Imation Way Oakdale, MN 55128-3414
63951337-B
2