User manual

Setup wIzard
To use the Setup Wizard for configuring disk settings, log in to the
DataGuard Management Interface and click at Device tab.
one-CliCk Setup
To use the One-Click Setup option, follow the instructions below.
From the Device tab, click Wizard on the left menu. The Wizard will
show three options: One-Click Setup, Basic Setup, and Manual Setup.
1. Click the One-Click Setup button. The application will
automatically assign a Computer Name, IP Address and
Storage Type.
2. Review these items in the Summary table. To change any setting,
click the Back button to return to a previous menu. To accept the
proposed configuration, click the Submit button.
Setup will continue automatically; disk configuration will take time.
DataGuard Appliances with more or larger hard drives will take longer.
Progress is displayed during the initialization process.
3. When the setup process is finished, the message Setup Wizard
Complete will appear.
Device > Wizard > One-Click Setup
rAid SettingS
The DataGuard Appliance uses RAID (redundant array of independent
disks) technology to manage multiple hard drives as if they are
one storage device. As more hard drives are added, higher levels
of performance and redundancy become possible. If you use the
One-Click Setup option, the DataGuard Management Interface
selects the RAID type automatically based on the number of the
hard drives installed:
Number of installed hard drives 1 2 3 4 5
RAID type RAID0 RAID1 RAID5 RAID5
RAID5
If you plan to create multiple arrays or logical drives, or if you want
to specify a particular RAID level, click the Manual Setup button and
refer to “Storage Tab” on page 3017 for instructions.
Number of installed hard drives 1 2 3 4 5
RAID type RAID0 RAID1 RAID5 RAID5 RAID5
✓
16