User manual

SyStem StatuS
System Status alerts are linked to menus with configurable options
and more information. Click any of the first five items listed—Controller,
Voltage, Temperature, PSU (R4 only) or Cooling Unit—to view the
Component List on the Device tab.
• Click Disk Array to view the embedded Create Disk Array menu on
the Storage tab.
• Click Logical Drive to view the Logical Drive Management menu on
the Storage tab.
• Click Physical Drive to view the Physical Drive menu on the Device
tab.
• Click Spare Drive to view the Spare Drive Management menu on
the Storage tab.
• Click File System to view the File System menu on the NAS menu
tab.
• Click Firmware to view the Firmware updates menu on the
Administration tab.
The conditions of various system functions are indicated by icons as
follows:
The component is OK.
The component needs attention.
The component has failed.
fIle SyStem overvIew
This area displays logical drives, their capacities, and the percentage
of each in use. To view file system details or run diagnostic tests, click
the “More” link at the top right. This will open the Storage tab and
File System menu item, shown below.
Storage > File System
Dashboard > File System Overview
13