User manual

dataguard management Interface

The DataGuard Management Interface works with most popular

web browsers to let you manage the R4 or T5R. Once the device

is powered on, is connected to the network and has an IP address,

the DataGuard Management Interface can perform conﬁguration

and maintenance functions.

uSing tHe dAtAguArd mAnAgement interFACe

To use the DataGuard Management Interface, open a compatible

web browser. Check the LCD display panel to ﬁnd the IP address for

the device. Type this address in the web browser and press Enter or

Return. The browser should display a login screen.

1. Type the User Name in the ﬁeld provided. The default user name

is “administrator” and is case-sensitive.

2. Type the Password in the ﬁeld provided. The default password is

“password” and is case-sensitive.

3. Choose your Language preference from the drop-down list. The

default language is English.

4. Click the Login button.

5. After a you log in successfully, the Dashboard will appear in the

browser window. It displays System Status and other information

about the DataGuard Appliance, and provides links to the most

often used menus.

Note: Please change your password immediately after your login.

From the Administration tab, click the NAS User menu item. Move

your pointer over the administrator row, then click Change Password.

Keep your administrator password in a safe place.

daSHBoard taB

The Dashboard tab displays top-level system status. When the

system is functioning normally, a gray circle with a check mark will

appear next to the speedometer icon. If errors are encountered,

a red circle with an X will appear next to the speedometer icon.

See the examples below.

If an error appears on a Dashboard item, click on the error symbol

for details and instructions.

The system is OK.

The system has detected errors.

Dashboard