DEFENDER™ H200+BIO USER GUIDE Contents Introducing Defender™ H200+Bio Minimum System Requirements Device accessories Imation Documentation 2 2 2 3 Getting Started Plugging in the device Personalizing a device 4 4 4 Accessing data on the device Logging into and out of the device Saving and opening files Disconnecting the device 7 7 8 8 Troubleshooting 9 Warranty Information 11
INTRODUCING DEFENDER™ H200+BIO Defender™ H200+Bio is a USB (Universal Serial Bus) portable hard drive with built-in biometric security, data encryption, digital identity, and cryptographic services. Figure 1-1: Defender H200+Bio This guide is designed to help you set up your Defender H200+Bio device with minimal effort. MINIMUM SYSTEM REQUIREMENTS Defender H200+Bio comes with built-in Imation Defender ACCESS Standard™ software on its application partition.
INTRODUCING DEFENDER™ H200+BIOcont. IMATION DOCUMENTATION You can find detailed instructions about using and managing Defender™ H200+Bio in the ACCESS Standard User Guide. Topics include: • • • • • • • Information about Imation Defender Collection Devices Personalizing the device Accessing the device Managing users Managing devices Protecting the device from viruses Troubleshooting Online Help is also available with ACCESS Standard software.
GETTING STARTED Before you can use your device, you must properly connect it to the computer. After you plug in a new device, you must personalize it before you can use the authentication and private partition features. The device uses pre-installed ACCESS Standard software to guide you through the personalization process. The personalization wizard starts automatically when you plug in a new (or recycled) device.
GETTING STARTED • • • • • • • 2. cont. Minimum password length: 6 Password Retry Limit: 10 Password Re-use Threshold: 3 User Rescue: Enabled Data Destruction: Off Administrator Account: Enabled Biometric Retry Limit: Infinite Creating the Administrator account—Only the Administrator can perform certain operations on a device, such as adding, removing, and rescuing users. During the personalization process, the Administrator account is created automatically when you set the Administrator password.
GETTING STARTED cont. Note 1: If you do not complete the personalization process you may have to repeat some of the above steps the next time you connect the device. For more information about the personalization process, see the ACCESS Standard User Guide. Note 2: After you successfully complete the personalization process, you can access your private partition using a file manager.
ACCESSING DATA ON THE DEVICE After you personalize a device, only registered users can authenticate to it. Authentication involves logging into the device using a password, fingerprint, or both. The authentication method you use depends on the capabilities of the device and the profile applied to the device. After you successfully log in, you can save files to, and open files from, your private partition.
ACCESSING DATA ON THE DEVICE cont. SAVING AND OPENING FILES When you plug in your device both the application drive and the private partition display in a file manager, such as Windows® Explorer, with an associated drive letter for each partition. Application drive Private partition Once you log into the device, you can open files on your private partition using the appropriate program or a file manager.
TROUBLESHOOTING If you experience difficulty using Defender™ H200+Bio after following the instructions in this User Guide, read the following troubleshooting information. • Check to make sure the USB cable is plugged in properly and that the cable provides sufficient USB power to the device. For information about how to properly plug in the device to ensure adequate power, see “Plugging in the device” on page 4.
TROUBLESHOOTING cont. Table 4-1: LED status for devices LED status Description Flashing red The device is either powering up or is totally blocked. When totally blocked, no authentication methods are available to allow a user to log into the device; this indicates that the device needs to be recycled. Solid red The device is locked. Blue LED Indicates a data transfer activity for all devices. Flashing red and blue The device no longer has valid firmware.
WARRANTY INFORMATION Limited Warranty: If any defect in material or manufacture appears within 5 years of the date of original retail purchase of this product, it will be repaired or replaced at Imation’s option. Proof of purchase is required to obtain warranty service. This warranty does not apply to normal wear or bundled software. Imation will not be liable for any lost data or other indirect, incidental or consequential damages.
