Operations Manual

XXXX
Tour,
MPti
™
Long OperationsManual
Version
1
7 CHARGING RACKSET-UP
Each charging rack has ten slots and can
charge up to ten MPti™ players (see
Diagram A). They are fitted with an IEC
socket on the left-hand side and an IEC
plug on the right-hand side (see
Diagrams B &C).
A set of charging racks can be
connected in series (daisy-chained),
with the mains power lead plugged
into the IEC socket of the first charging
rack (see Diagram D). The IEC plug of
the first charging rack
with their backs against a solid wall to
brace against possible movement when
docking a player into a charging slot.
Charging racks will not overheat when
linked together, placed on top of each
other and placed against a wall.
Connection
Clip
Slot
Connection
Clip
Slot
plugs into the socket of the following
charging rack
and so forth.
The racks are powered via an ON/OFF
switch above the fuse holder on the front,
bottom left-hand side, with the switch
on. The switch light should glow red
when the power is on.
To add stability, each
charging rack is
connected to adjacent
racks by means of
black
thre
e-
pron
ged
conn
ection clips; these are inserted into
the rectangular slots on the front
top corners of each rack.
The left-hand prong of the clip is
placed into the right- hand slot of
E. Horizontal