Contour i1 Air
Contour i1 Air ENGLISH FR ES Thank you for choosing Contour i1 Air. This manual will get you up and running in no time, and explains how to make the most of your Contour i1 Air. We’re constantly improving and adding new features to our products. To take advantage of any enhancements made since your product was shipped, please visit www.pure.com where you can check for any updated versions of software and download the latest version of this user guide in PDF format.
Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 2 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this product near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.
Contents 4 Introduction 4 Pure Connect app 5 Getting started 5 Quick setup 9 Overview 9 10 11 11 12 Remote control Controls and connectors Display Switching between Sleep, Standby and On Network setup EN 14 Using AirPlay to play audio 14 14 Selecting AirPlay as a source Playing audio from iTunes or an iOS device 15 Listening to a docked iPod/iPhone/iPad 16 Using the auxiliary input 16 Using the sleep timer 17 Using the alarm 19 Options and settings 21 Help and specifications 3
Introduction Contour i1 Air can be used in a number of different ways: • As an AirPlay device for playing audio from a compatible iPod Touch, iPhone, iPad, or iTunes (via a PC or Mac). • As a docking station for an iPod, iPhone or iPad. • As a speaker for an audio device connected via the Aux In connector. Note: Contour i1 Air will be referred to as Contour throughout the rest of this user guide.
Getting started EN Quick setup 1 Pull the plastic tab from the remote control battery compartment and remove the protective film from remote buttons. 2 Push the right hand end of the front panel to release the dock. Info 3 Insert the adaptor (lightning (A) or 30 pin (B)) that corresponds to your iPod/ iPhone/iPad into the connector socket (C) as indicated on the following page.
Removing an adaptor: Inserting an adaptor: 6
EN 4 Insert the connector of the AC electrical power adapter into the socket on the rear of Contour and plug in to the AC electrical outlet. Contour i1 Air 12V DC 5 Press and on the remote to view the available languages (English/French/German/ Italian/Spanish) used for displaying menus and options and press Select to confirm your choice. 6 Press and on the remote to select the region closest to you and press Select to confirm. Repeat to select the time zone.
9 Dock your unlocked Apple device (iPod touch, iPhone or iPad). DOCK UNL 10 Press Select or the Wi-Fi connect button on the back of Contour when the ‘PRESS SELECT’ prompt scrolls across Contour’s screen. PRESS SE 11 When Contour’s screen displays ‘WAITING’, tap Allow on the screen of your iPod/ iPhone/iPad when you are asked if you would like to share your Wi-Fi settings.
Overview EN Silkscreen text = Pantone Cool Gray 10C (for White colour) Standby: Press to switch between Sleep,case Standby and On. Remote control See page 11 Mute: Press to mute the volume. + Vol Volume up/volume down Source Info Press to switch between AirPlay, iPod and Auxiliary input sources. Sleep Press and repeat to set a sleep timer. Info Alarm Press to enter/exit the alarm menu. See page 17 for more information. Menu Press to view Options menu to change settings.
Controls and connectors Source Press to change between AirPlay, iPod and Auxiliary input. Snooze/Sleep If an alarm is sounding, press to snooze. Press to set the sleep timer interval. Mute Volume down Volume up On/Sleep/ Standby iPod/iPhone/ iPad dock Press the right hand end of the front panel to release the iPod dock. Bass port Remote control holder Storage recess for remote control. Contour i1 Air 12V DC DC In Connector for supplied AC power adapter.
EN Display Repeat all indicator Source indicators Critical firmware problem indicator Snooze indicator Sleep timer set Alarm set Repeat once indicator Shuffle indicator Busy indicator Network status icons See page 12 Volume Scroll indicator Scroll indicator Text area Switching between Sleep, Standby and On Contour has three power modes: Standby, Sleep and On. In Standby, Contour uses minimal power.
Network setup Contour can be connected to your network using a wireless or wired connection. We recommend using the wireless connection method, which allows you to position your Contour anywhere within range of your wireless network. Contour can be connected to your wireless network using Apple Wi-Fi Network Login Sharing or manually (see the following page).
EN Connecting Contour to your wireless network using Apple Wi-Fi Network Login Sharing To connect Contour to your wireless network: 1. Dock your unlocked Apple device (iPod touch, iPhone or iPad) and wait a few seconds while your Apple device authenticates. Contour will display WAITING while your Apple device is authenticating. 2. After the Apple device has authenticated, the current time will display on the screen. Press the Wi-Fi Setup button on the back of Contour. 3.
Using AirPlay to play audio Selecting AirPlay as a source Press Source on the remote control until AirPlay is displayed on the screen. Playing audio from iTunes or an iOS device After adding Contour to the same network as your iTunes computer, iPod touch, will be displayed in white to indicate that an iPhone or iPad, the AirPlay icon AirPlay device has been detected. icon.
Listening to a docked iPod/ iPhone/iPad EN Compatibility The dock on Contour can be fitted with either the supplied 30 pin or lightning adaptor and is compatible with most iPod, iPhone and iPad models. For the latest information, check the compatibility table on our website: www.pure.com/products/ipod-compatibility. Docking your device Insert the adaptor that corresponds to your iPod/iPhone/iPad into the connector socket. Dock your device onto the connector.
Using the auxiliary input Connecting an auxiliary device Connect the line out or headphone socket of your auxiliary device to the Aux In socket on your Contour using a suitable cable. 12V DC Wi-Fi Setup Aux In Ethernet Selecting the auxiliary input Press Source until Aux is displayed on the screen. Using the sleep timer The sleep timer switches Contour into standby after a number of minutes has elapsed. Setting the sleep timer 1. Press the Sleep button. 2.
Using the alarm EN Contour i1 features an alarm which you can set to sound a tone or play a track from your iPod/iPad/iPhone. Setting an alarm Press the Alarm button on the remote to show the status of the Alarm. Press the or buttons and Select to adjust the following settings: Alarm on/off ON Press or to choose between ‘ON’ (alarm sounds) or ‘OFF’ (alarm does not sound) and press Select. ON Set Time Set the alarm time. Press or to adjust the hours then press Select.
Cancelling a sounding alarm To cancel a tone alarm press the Alarm, Select or Standby button. Note: A sounding alarm will switch off after one hour unless you cancel it. Snoozing a sounding alarm To snooze a sounding alarm press the Snooze button on Contour or the Snooze button on the remote. The alarm will be silenced for 10 minutes (the default snooze time) then sound again. The icon on the screen indicates when an alarm is snoozed.
Options and settings Press the Menu button to access the Options menu, press and change the options and press Select to confirm. EN or to scroll through Display Choose one of the following options to specify what is displayed on the screen: TIME Full screen clock. DATE Current date. Clock The clock is automatically set via your internet connection if your router is connected to the internet. You can adjust the following settings: Manually set the time and date if required.
Audio Adjust the bass and treble: BASS Adjust the bass between -3 (minimal bass), 0 (neutral) and 3 (maximum bass). Adjust the treble between -3 (minimal treble), 0 (neutral) and TREBLE 3 (high treble). Language Choose from English, French, German, Italian or Spanish. Advanced VERSION Press or to display the production firmware version or the platform version on the screen. MAC Display the MAC address of Contour on the screen. IP Display the IP address of Contour on the screen.
Help and specifications EN Hints and tips I cannot connect to my wireless network Ensure that your Contour is within range of your wireless router and that you are not located in a dead spot. The audio and network connection keeps dropping when using Wi-Fi If using an iPhone, iPod touch or iPad, make sure you’re running the latest version of iOS. Your Wi-Fi may be congested by other networks on the same or close by channels. Consult your router documentation or contact Pure support.
Copyright Copyright 2013 by Imagination Technologies Limited. All rights reserved. No part of this publication may be copied or distributed, transmitted, transcribed, stored in a retrieval system, or translated into any human or computer language, in any form or by any means, electronic, mechanical, magnetic, manual or otherwise, or disclosed to third parties without the express written permission of Imagination Technologies Limited. Version 1 July 2013.
FCC NOTICE TO A USER IN THE UNITED STATES Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
24
