User's Manual

12
2. Insert the connector of the mains power adapter into the socket on the rear
of Jongo and plug in to the mains supply. When Jongo is first plugged in, the
Power light will pulse red. When Jongo has finished booting up, the Power
light will light green.
5.5V DC
Line out Digital optical out
Digital coaxial out
R
L
5.5V DC
Jongo
A2
Jongo supports two wireless connection methods. See the following page to finish
setting up your wireless connection manually. If you have a router that supports
WPS, you can use the simpler Push Button Configuration method to connect
Jongo to your wireless network. See page 20 for more information.
Jongo-A2-V1-Amer.indb 12 4/9/2013 2:32:25 PM