User's Manual

16
Status tab
The Status tab displays a summary of Contour 200i Air’s firmware/hardware information and also
displays information about the state of the wireless connection.
Connection
Status
Indicates if Contour 200i Air is connected to a wireless network or not. Also
indicates the wireless LAN type, i.e. Basic Service Set, Extended Service Set.
Signal
Strength
Displays the strength of the wireless connection between Contour 200i Air
and the peer network device.
Wireless
Channel
Displays the channel being used by the wireless connection.
Firmware
Date
Displays the date that the firmware was created on.
Firmware
Version
Displays the version of firmware that is loaded on Contour 200i Air.
Product
Version
Displays the product version of Contour 200i Air.
Host
Firmware
Version
Displays the host firmware version.
WPS PIN Displays the Wi-Fi Protected Setup (WPS) pin number that has been
configured on the Contour 200i Air (only required if your wireless network
supports WPS).